BOSCH電源模塊,**REXROTH電源模塊
如果您對該產品感興趣的話,可以
產品名稱: BOSCH電源模塊,**REXROTH電源模塊
產品型號: HED8OH20/100K14250VAC?
產品展商: REXROTH
產品文檔: 無相關文檔
簡單介紹
BOSCH電源模塊,**REXROTH電源模塊
clamping and drive module. Using the modules for external
attachment, the hydraulic controls can, however, also be installed
arbitrarily into every system. The reducing module
BOSCH電源模塊,**REXROTH電源模塊
的詳細介紹
BOSCH電源模塊,**REXROTH電源模塊
type RBAIH15A allows for direct attachment of the IH15A
modules to the tank cover of a conventional drive unit. Using
the reducing module type RIH15AR, the hydraulic control can
be attached to one control of the IH15B control module family.
The modules have preferably been designed for hydraulic
controls for low-flow actuators up to a flow of 14 l/min. They
are connected by means of two tie rods.
The IH15A control modules for the UPE2 clamping and drive
module (51142) serve the realization of complete hydraulic controls.
X, Y and Z are reference axes for determining the installation
dimensions for attachment of the control blocks.
For calculating the installation height, the height dimension X
on pages 16 to 21 and 23 to 71 must be added up according
to the control blocks used.
They can be fitted and mounted individually. The directional
valve modules and seat valve modules can be combined.
Installation position Any 1)
Hydraulic fluid Mineral oil (HL, HLP) according to DIN 51524 part 2
other hydraulic fluids upon request
Hydraulic fluid temperature range °C –20 to +80 (with FKM seals)
(observe the admissible viscosity range of the pump andthe valves!)
The control modules allow for direct attachment to the UPE2
