日本油研單向調速閥應用指南，YUKEN調速閥
概述：
by the variation in the pressure (load) and temperature
(viscosity of hydraulic fluids). These valves are optimal
and speed change of the actuator are required to be d one without shocks.
for such a usage where the start-up, stop
These valves vary their output flow proportionally to an input current,
The valves are used together with the applicable power amplifiers
and optionally regulated. Furthermore, as the valves have the functions of pressure
and temperature compensation, the flow rate is not affected
therefore, by controlling the input current f rom the power amplifier,
the flow rate in the system can be continuously, remotely
技術參數：
uororubber) are required to be used. Use water-glycol fluid.
Use fluids equivalent to ISO VG 32 or VG 46. Use phosphate ester
Petroleum Base Oils Synthetic Fluids Water-Containing Fluids
and shorten the life of the valve. Please maintain the degree of contamination
or polyol ester fluids. When phosphate ester fluid is used,
the hydraulic fluids which may otherwise lead t o breakdowns
Use hydraulic fluids which satisfy the both recommended viscosity
and oil temperatures given in the table below.
Due caution must be paid to maintaining control over contamination of
within NAS 1638-Grade 1 1. Use 20 μm or finer line filter.
prefix "F-" t o the model number because the special seals
