**供應寶得直動式二位二通升降式銜鐵閥

**供應寶得直動式二位二通升降式銜鐵閥
上海乾拓貿易有限公司
企業QQ：
電話；021-69001039
手機；17321017802（微信）
郵箱；17321017802@163.com
地址：上海市嘉定區江橋嘉涌路99弄6號713室
(supplied as standard) Protection class IP 65 with cable plug Weight [kg] 0.6 (brass version)
Installation As required, preferably with actuator upright
Power consumption Inrush Hold (hot coil) 1) AC [VA] AC [VA/W] DC [W] 35-40 16/10 approx.12 (13)
Response times Ori? ce [mm] Opening [ms] Closing [ms] AC DC AC DC 1.0-6.0 10-20 20-80 20-30 20-30
1) value in brackets at coil temperature 20 oC
直動式、介質隔離的柱塞電磁閥。線圈和閥體之間通過不銹鋼波紋管隔熱和密封隔離，
Type 1078 Timer unit
Type 2511 ASI cable plug
焊接金屬波紋管系統 (316Ti)
*質量 PTFE 閥座密封
介質溫度 -200 °C …+180 °C
節能的 "Kick and Drop“ 電子裝置
2/2-way Solenoid Valve for low and high temperatures
The direct-acting valve Type 2610 is delivered with circuit function normally closed.
 The thermal isolation of the coil and housing by means of stainless steel bellows allows the extreme medium temperature.
 In this way condensation or an unacceptable heating up of the coil is avoided. The supplied cable head contains a "kick and drop"
 electronic that supports the opening phase and afterwards reduction of the opening holding power.
? For gases and fluids
Circuit function A
2/2-way valve, normally closed by spring force
Technical data Ori? ce DN 1.0 - 6.0 mm Body material Brass with stainless steel seat 1.4305 or stainless steel body
1.4581 Coil material Epoxy Coil insulation class H Seal material FKM, PTFE (others on request) Media FKM
Hot air, hot oils, oils with additives, per-solutions Water,
使該閥適用于極*的介質溫度和腐蝕性介質。電磁線圈采用耐化學腐蝕的環氧樹脂封裝。
因此，該閥尤其適用于苛刻的介質。標準供貨的電纜插頭帶“kick and drop”電子線路，
使該閥能夠打開，并在打開之后將電流減小到保持功率。
與 DIN EN 17301-803 A 型電纜插頭配套，該閥的安全防護等級為 IP65，不銹鋼閥體式 NEMA 4X。
直動式介質隔離電磁閥，通徑 DN 12
? Pressure range up to 100 bar
Circuit function A Servo-assisted 2/2-way valve, direct acting, normally closed.
Technical data Body material Brass with stainless steel seat 1.4581 Stainless steel body and stainless steel seat
 1.4581 Metal bellows Stainless steel 1.4541 Seal material PTFE Medium Neutral gases and liquids Medium temperature -200 to +180 °C
 Ambient temperature Max. +50 °C Viscosity Approx 21 mm2/s Operating voltages 24/110 VUC 220-230 VUC Voltage tolerance Max.
±10% Cycling rate 10/min Power consumption Kick and Drop electronic  72/4 W Duty cycle Continuous operation 100% ED Electrical
 connection Cable plug for ? 7 mm cable (included in delivery) Protection class IP65 with cable plug Installation position As required,
 preferably with actuator upright Weight 1.1 kg
Type 0255 can be combined with...
? Seat valve, direct-acting
steam, fuels, hydraulic materials, alcohol, organic solvents, waste gas
Media temperature FKM PTFE Steel
-10 to +130 °C -40 to +180 °C Up to + 250 °C (on request) Viscosity Max. 21 mm2/s Ambient temperature Max.
 + 55°C (250 °C on request), please see ordering chart Voltage tolerance ± 10% Duty cycle
100% continuous rating Electrical connection Cable plug for ? 7 mm cable, acc. to DIN EN 175301-803 Form A
? Media temperature up to 250 °C
? Push-over solenoid system
直動式升降式銜鐵電磁閥也適合*壓和*溫。
重疊的線圈系統
緊湊型結構形式
2/2-way Solenoid Valve for high pressures and temperatures
The direct-acting plunger solenoid valve Type 0255 is also suitable for high pressures and high temperatures.
Type 2508 Cable plug

**供應寶得直動式二位二通升降式銜鐵閥