SMC表面電位傳感器***，日本SMC傳感器產品說明

SMC表面電位傳感器***，日本SMC傳感器產品說明
上海乾拓貿易有限公司
企業QQ：
電話；021-69001039
手機；17321017802（微信）
郵箱；17321017802@163.com
地址：上海市嘉定區江橋嘉涌路99弄6號713室
25 to 75 mm ±5% F.S. (0 to 50°C, at detection distance: 50 mm) 100 ms or less 24 VDC
±10% 40 mA or less 0 to 50°C 35 to 85% Rh (with no condensation) Head case : ABS      
Amplifier case : ABS Durability 50 Hz    Amplitude 1 mm   X, Y, Z each 2 hours 100 m/s2 185 g (including cable mass)
89/336/EEC, 92/31/EEC, 93/68/EEC, 2004/108/EC UL508
24 VDC, Ripple (p-p) 10% or less (with power supply polarity protection) 50 mA or less (excluding sensor unit’s current consumption)
 1 to 5 VDC (Input impedance: 1 MΩ) 1 input With excess voltage protection (up to 26.4 V)
Model 10 Electrostatic sensor
±0.4 kV ±20 kV
Model Potential measurement Output voltage Effective detection distance Linearity Output delay time
±1% F.S. or less
200 ms (without filter), 1.5 s (with filter) or less
±0.5% F.S. ±1 digit or less 3 + 1/2 digit, 7-segment indicator, 2-color display (Red/Green) Sampling cycle:
5 times/s OUT1: Illuminates when output is turned ON (Green), OUT2: Illuminates when output is turned ON (Red).
IP40 Operating: 0 to 50°C, Stored: –10 to 60°C (with no freezing or condensation) Operating/Stored:
35 to 85% RH (with no condensation) 1000 VAC for 1 min, between live parts and housing 50 MΩ or more (with 500 VDC Mega), between live parts and housing
IZD10-510 –20 kV to +20 kV Note 2) 0.1 kV 25 to 75 mm
10 to 50 mm ±5% F.S. (0 to 50°C, at detection distance: 25 mm)
Environmental resistance
Temperature characteristics Connection method Material Mass (excluding power supply/output connection cable) Standards
Number of inputs Input protection
Response time (including sensor response time)
Sensor connection: 4-pin connector Front case: PBT, Rear case: PBT 30 g CE marking, UL (CSA) compliant
10 to 150 Hz at whichever is smaller of 1.5 mm amplitude or 98 m/s2 acceleration, in X, Y, Z direction for 2 hrs. each (De-energized)
Connection sensor Rated measurement range Min. unit setting Measurement distance setting Power supply voltage Current consumption Sensor input
Display acurracy Display Indicator light
Output current: 4 to 20 mA (with rated pressure range) Max. load impedance: 600 Ω (at 24 VDC), Min. load impedance: 50 Ω
Hysteresis mode: Variable Window comparator mode: Variable
or less (based on 25°C) Power supply, Output connection: 5-pin connector,
Note) The relationship between the measured potential and the output voltage varies depending on the detection distance.
For details on the relationship in the detection distance between the measured potential
and the output voltage, refer to the graph in “Technical Data - Output Signal” on page 1085.
Protective class : Class III (EN60950-1) Pollution Degree 3 CE marking : Low voltage directive : 73/23/EEC
, 93/68/EEC Only when connected to a SELV-type external circuit.
IZD10-510 ±20 kV (at detection distance: 50 mm)Note)
Enclosure Operating temperature range Operating humidity range Withstand voltage Insulation resistance
NPN or PNP open collector: 2 outputs 80 mA 30 VDC (with NPN output) 1 V or less (with load current of 80 mA) With short circuit protection
Max. load current Max. applied voltage Residual voltage Short circuit protection Response time (including sensor response time)
100 ms or less Response time with anti-chattering function: 500 ms, 1 s, 2 s or less Output voltage:
 1 to 5 V (with rated pressure range), Output impedance: Approx. 1 kΩ ±1% F.S. or less
IZD10-110 –0.4 kV to +0.4 kV Note 1) 0.001 kV 10 to 50 mm
Power supply voltage Current consumption Operating ambient temperature Operating
ambient humidity Material Vibration resistance Shock resistance Mass
Compliance with EN standards
EMC directive UL standard
IZD10-110 ±0.4 kV (at detection distance: 25 mm)Note)
100 m/s2 in X, Y, Z directions 3 times each (De-energized) ±0.5% F.S.

SMC表面電位傳感器***，日本SMC傳感器產品說明