DSG-01-3C4-D24-50,***油研先導式溢流閥
如果您對該產品感興趣的話,可以
產品名稱: DSG-01-3C4-D24-50,***油研先導式溢流閥
產品型號: DSG-01-3C4-D24-50
產品展商: YUKEN
產品文檔: 無相關文檔
簡單介紹
DSG-01-3C4-D24-50,***油研先導式溢流閥
In spring offset type, it is a standard configuration that the solenoid is mounted onto the valve in the SOL b position
(side). However, in this particular spool-spring arrangement, the mounting of the solenoid onto the valve in the reverse
DSG-01-3C4-D24-50,***油研先導式溢流閥
DSG-01-3C4-D24-50,***油研先導式溢流閥
的詳細介紹
DSG-01-3C4-D24-50,***油研先導式溢流閥
In case No-spring detented type valves are used in the
solenoid de-energised state, install the valve in such a
way that the axis L-L' becomes horizontal to get the
企業QQ；
手機：
聯系人：劉艷
detent effect firmly. For the valve types other than the
above, there are no restrictions on the mounting posture.
For double solenoid valves do not energise both at the
DSG-01-3C4-D24-50,***油研先導式溢流閥
same time as it will result in coils burning out.
Avoid connecting the valve tank port to a line with
Piping end of tank line should be submerged in oil.
在閥式3C60，在的情況下，致動器，如下所示把上在汽缸端口A和B之間和
其中致動器移動，并懸浮在其行程端并且其中所述閥然后切換到中立位置
致動器的懸掛狀態下，本放大器是為驅動LSVG?規 格
DSG-01-3C4-D24-50,***油研先導式溢流閥
